coinop.org search

(e.g. bosconian, atari, wells gardner, vector, dig dug pinouts))

results for "Stargate"

Stargate

Space - protect humanoids from aliens. Even more hyper-active sequel to Defender.

Member Rating

(4 total votes)

more info...

All Game Matches:

Stargate
Space - protect humanoids from aliens. Even more hyper-active sequel to Defender.

Defender
Side-scrolling shooter. Defend your humanoids against abduction. Zen.

Coinop.org Pages

/sale/multiwilliams.aspx
MultiWilliams The Williams Multigame, or MultiWilliams, is a 6-in-1 arcade game. It plays Defender, Stargate, Robotron, Joust, Bubbles, and Splat. Games are selected through a menu system, and are fully original, not emulation. They run on original Williams hardware with a few added boards to accomplish the switching. This means you can enjoy 6 original arcade games in one cabinet, and they take up only 1/6 the space. Below is a visual time
File: /sale/multiwilliams.aspx - 3 K - Updated 2011.08.27

/sale/index.aspx
Sale / Wanted Looking for joysticks, buttons, DIY controller boards, etc? FOLLOW THIS LINK Parts part price notes buy ER-2055 EA-ROM $2.75 Sold Out! EA-ROM chip for high score save on older Atari games, such as Tempest, Centipede, Dig Dug, Liberator, Re
File: /sale/index.aspx - 28 K - Updated 2011.08.27

/repair/index.aspx
Repair / Restoration Guides Power Supplies Williams Linear Power Supply (Defender, Joust, Bubbles, Stargate, Robotron, etc) Monitors Monitor Tube Swap (get that fresh, burn-free feeling!) Coinop.org repair logs / restoration info Baby Pac-Man repair log /restoration information Crystal Castles repair log /restoration informati
File: /repair/index.aspx - 2 K - Updated 2011.08.27

/repair/ps_williams.aspx
Williams Linear Power Supply This repair guide is for the Williams linear power supply present in Defender, Stargate, Bubbles, Robotron, Splat, Sinistar and Joust. There are two versions of this power supply, once complete with the heatsink on the board, and one with a detached heatsink. Why fix the linear power supply? It keeps the equipment original, which for a collector is important. It's rewarding. These boards are fairly simple. Linear power supplies can provide extremel
File: /repair/ps_williams.aspx - 5 K - Updated 2011.08.27

"Maybe" Images

(fuzzy search, these MAY match the game, or they may not)

Knowledge Base

Typical Failures of Early Williams Games
From: woodcock@crchh75b.bnr.ca (Gregg Woodcock) Newsgroups: rec.games.video.arcade.collecting Subject: Re: Typical Failures of Early Williams Games Date: 22 Feb 1994 23:29:15 GMT richard.l.schieve (rls@cbnewsc.cb.att.com) wrote: > Several people have asked me to repost some of my old articles. > I suspect many have seen the following which was one of my first > "Tech Tips" ;-) Sorry to do this to you again, Rick, but I have added a BUNCH of stuff to your file and would like to "share", too (I c
File: /kb_dl.aspx/KB/gametech/williamhwfailures.html - 23 K - Updated 2000.01.23

Williams Hardware Description
The older Williams games (Defender, Stargate, Robotron, Joust, Bubbles and Sinistar) have very similar hardware inside. These machines have five PC boards: CPU/Video- the main board, containing the CPU, RAM and video circuits The game CPU is a Motorola 6809E. There are 24 4116 RAM chips, giving 48K of DRAM, most of which is used for the video display (38K). There is also a 1K by 4-bit CMOS SRAM that is battery-backed-up. This retains the game configuration and high scores when the power is off.
File: /kb_dl.aspx/KB/gametech/williamshwdescription.html - 5 K - Updated 2000.01.23

UPGRADE: PLAY BUBBLES ON YOUR HACKED ROBOTRON/JOUST/STARGATE MACHINE
COPYRIGHT 1994 REVISION NUMBER: 1.0 (first public release) REVISION DATE: 1 Jun 1994 CREATED BY: Doug Jefferys STANDARD DISCLAIMER The author hereby grants permission to reproduce and distribute this document for personal use, subject to the condition that the document (along with any copyright and disclaimer notices) is not modified in any way. The opinions expressed within this document are those of the author only and not necessarily those of the author's employer. This document is provide
File: /kb_dl.aspx/KB/gametech/bubbles upgrade.html - 19 K - Updated 1999.11.02

/kb_dl.aspx/KB/gametech/williams_conversion.txt
----------------------------------------------------------------- | SWITCHABLE CONVERSION BETWEEN ROBOTRON, JOUST, AND STARGATE | ----------------------------------------------------------------- COPYRIGHT 1994 REVISION NUMBER: 1.1 (Minor bug fix: Line 976 now shows the correct "Y7-X8" connection, not the bogus "Y7-X7" connection from 1.0) REVISION DATE: 20 Oct 1994 CREATED BY: Doug Jefferys STANDARD DISCLAIMER: -------------------- The author hereby grants permission to rep
File: /kb_dl.aspx/KB/gametech/williams_conversion.txt - 57 K - Updated 1994.10.20

FAQ: Conversion v1.1
COPYRIGHT 1994 REVISION NUMBER: 1.1 REVISION DATE: 02 November 1994 REVISION HISTORY: 1.1 (02/11/94 - Clarified technical details in {6.4}, Added a few words on manuals in {7.3} and analog controllers in {8.1.3}) REVISION HISTORY: 1.0 (01/11/94 - First public release; FTP only) CREATED BY: Doug Jefferys, Steve Ozdemir THANX TO: Wayne Aiken, Graham Bisset, Duncan Brown, David Hanes, Tony Jones, John Keay, Patti Ozd
File: /kb_dl.aspx/KB/faqs/faq-conversion_v1.1.html - 117 K - Updated 1999.07.27

Stargate control panel layout and measurements
Typed by Franklin Bowen (bowens@erols.com) 4/8/96 ================================================================================ Here's the layout (courtesy of Steve Hawley - hawley@adobe.com) (1) (2) O (T)(F) (R) (S) (H) (I) 1,2 - 1 and 2 player start, tranparent red O - up,down lever, red (can use a Joust stick) R reverse, white T thrust, white F fire, white S smart bomb, green I inviso, red H hype
File: /kb_dl.aspx/KB/gametech/stargate panel.html - 3 K - Updated 1999.10.29

Stargate (Defender II) pinouts
Stargate (Defender II) Pinouts
File: /kb_dl.aspx/KB/gametech/stargate (defender ii) tech.html - 5 K - Updated 2002.09.24

A Random Games-list
Game Name Manufacturer Year Pinout Class ------------------------------------------------------------------------------ V 005 Sega 1981 18 Wheeler Midway 1979 3D Bowling MED 1978 H 720 Degrees Atari Games 1986 800 Fathom USB 1982 H Aeroboto William
File: /kb_dl.aspx/KB/faqs/list-randomgames.html - 73 K - Updated 1999.10.29

1996.09.29 GUIDE TO LOWER MAINLAND ARCADES
VERSION 1.0a : 1996.09.29 by Glenn Tarigan Additional comments by "Moby" Henry Kong Andrew Chang Feel free to distribute this document. Make sure the credits remain intact. I'd like to get some comments, especially from people who have been to any of the arcades mentioned here. What can I do to improve this guide? Do you have any details or opinions to add? Note: "Lower Mainland" refers to a southwest portion of British Columbia, Canada. The major arcades listed so far
File: /kb_dl.aspx/KB/faqs/faq-1996 lwr mainland arcades.html - 54 K - Updated 2000.02.20

/kb_dl.aspx/KB/pinouts/defender-jamma.txt
Name Of Game: Stargate to JAMMA Solder Side | Parts Side GND | A | 1 | GND GND | B | 2 | GND +5 | C | 3 | +5 +5 | D | 4 | +5 -5 | E | 5 | -5 +12 | F | 6 | +12 - KEY - | H | 7 | - KEY -
File: /kb_dl.aspx/KB/pinouts/defender-jamma.txt - 2 K - Updated 2003.01.06

/kb_dl.aspx/KB/pinouts/stargate-jamma.txt
Name Of Game: Stargate to JAMMA Solder Side | Parts Side GND | A | 1 | GND GND | B | 2 | GND +5 | C | 3 | +5 +5 | D | 4 | +5 -5 | E | 5 | -5 +12 | F | 6 | +12 - KEY - | H | 7 | - KEY -
File: /kb_dl.aspx/KB/pinouts/stargate-jamma.txt - 2 K - Updated 2003.01.06

/kb_dl.aspx/KB/gametech/board pinouts/maketrax.txt
Pinouts for MAKE TRAX (Williams, 1981) Submitted by shu@cco.caltech.edu / essayes@telerama.LM.com Here are the Make Trax pinouts, as promised. Unfortunately I can't confirm it's 100% correct, as my board has a bad RAM so I couldn't test any of the switches. At the very least the video and power contacts are correctly identified. Like I mentioned, the board is not the big multi-unit Williams setup used in Stargate, Robotron, etc. It's a single board, kinda small. 36-pin edge connector A GND 1 GND
File: /kb_dl.aspx/KB/gametech/board pinouts/maketrax.txt - 1 K - Updated 1994.09.24

JAMMA/AAMA Standard Connector Pinouts and JAMMA Game list
JAMMA/AAMA Standard Connector Pinouts and JAMMA Game List
File: /kb_dl.aspx/KB/gametech/jamma tech.html - 46 K - Updated 2002.05.17

Yet Another List
O-Taito is the Old Taito pinout on wiretap. N-Taito is the New-Taito pinout (Like Elevator Action). Quote by R. Schieve: "Taito.pin will match most for power, ground, monitor, and speaker connections but inputs are usually quite different." DECO/Data East is the Data East pinout. See Ring King.pin or KarateChamp.pin.I AtariV is Black Widow and Gravitar and Space Duel Konami if the Konami pinout. See Konami\Rush'n'Attack.pin. BZone is Battle Zone and Red Baron Tehkan games seem to follow th
File: /kb_dl.aspx/KB/faqs/list-yetanothergameslist.html - 49 K - Updated 2002.06.10

/kb_dl.aspx/KB/test_equipment/univid 1000/univid_harness.txt
From: jeff hendrix <jhendrix@quark.com> To: "'vectorlist@mcfeeley.cc.utexas.edu'" Subject: RE: Univid 1000 Date: Mon, 1 Mar 1999 11:44:51 -0700 Here is a list of the harnesses and what boards they go to, I also might have a few harnesses for trade. UNIVID 1000 harness numbers Atari 101 Arabian 102 Centipede 103 Cloak & Dagger 104 Crystal Castle 105 Dig Dug 106 Food-Fight 107 I-Robot 108 Kangaroo 109 Liberator 110 Millipede 111 Pole Position 111 Pole Position II 112 Xevious Ce
File: /kb_dl.aspx/KB/test_equipment/univid 1000/univid_harness.txt - 3 K - Updated 2005.09.18

/kb_dl.aspx/KB/pinouts/stargate.txt
Stargate, Williams ------------------- ----------------- | ==== ==== | | 2J3 2J4 | | | ----------- | | | "| | | | 3J2 "| | | | "| | | | | | | | "| | | | 3J3 "| | | | "| ---------|-----|-
File: /kb_dl.aspx/KB/pinouts/stargate.txt - 5 K - Updated 2003.01.06

/kb_dl.aspx/KB/pinouts/cloak_and_dagger.txt
Cloak & Dagger Atari Inc., 1983 ------------------------------- There are two Cloak & Dagger conversion kits. One is for converting from Defender, and the other is for converting from Joust, Robotron 2084, or Stargate. There are two boards to the Cloak & Dagger boardset, Master and Slave PCB, plus an Interconnect PCB, an Electromagnetic Interference (EMI) PCB, and a Sound Board. A040733-01 EMI Shield and Dual PCB Assembly -- includes: A039431-01 Cloak & Dagger Interconnect P
File: /kb_dl.aspx/KB/pinouts/cloak_and_dagger.txt - 8 K - Updated 2003.01.06

/kb_dl.aspx/KB/gametech/cloakanddagger.txt
Cloak & Dagger Pinouts Atari Inc., 1983 There are two Cloak & Dagger conversion kits. One is for converting from Defender, and the other is for converting from Joust, Robotron 2084, or Stargate. There are two boards to the Cloak & Dagger boardset, Master and Slave PCB, plus an Interconnect PCB, an Electromagnetic Interference (EMI) PCB, and a Sound Board. A040733-01 EMI Shield and Dual PCB Assembly -- includes: A039431-01 Cloak & Dagger Interconnect PCB A039938-21 Cloak & Dagg
File: /kb_dl.aspx/KB/gametech/cloakanddagger.txt - 11 K - Updated 1995.04.22

/kb_dl.aspx/KB/gametech/board pinouts/cloakanddagger.txt
Cloak & Dagger Pinouts Atari Inc., 1983 There are two Cloak & Dagger conversion kits. One is for converting from Defender, and the other is for converting from Joust, Robotron 2084, or Stargate. There are two boards to the Cloak & Dagger boardset, Master and Slave PCB, plus an Interconnect PCB, an Electromagnetic Interference (EMI) PCB, and a Sound Board. A040733-01 EMI Shield and Dual PCB Assembly -- includes: A039431-01 Cloak & Dagger Interconnect PCB A039938-21 Cloak & Dagg
File: /kb_dl.aspx/KB/gametech/board pinouts/cloakanddagger.txt - 11 K - Updated 1995.04.22

/kb_dl.aspx/KB/gametech/conversion_faq_v1.1.txt
1.0) Conversion FAQ: -------------------- COPYRIGHT 1994 REVISION NUMBER: 1.1 REVISION DATE: 02 November 1994 REVISION HISTORY: 1.1 (02/11/94 - Clarified technical details in {6.4}, Added a few words on manuals in {7.3} and analog controllers in {8.1.3}) REVISION HISTORY: 1.0 (01/11/94 - First public release; FTP only) CREATED BY: Doug Jefferys, Steve Ozdemir THANX TO: Wayne Aiken, Graham Bisset, Duncan Brown, David Hanes, To
File: /kb_dl.aspx/KB/gametech/conversion_faq_v1.1.txt - 115 K - Updated 1994.11.02

/kb_dl.aspx/KB/gametech/cloak&da.ger.txt
Cloak & Dagger Pinouts Atari Inc., 1983 There are two Cloak & Dagger conversion kits. One is for converting from Defender, and the other is for converting from Joust, Robotron 2084, or Stargate. There are two boards to the Cloak & Dagger boardset, Master and Slave PCB, plus an Interconnect PCB, an Electromagnetic Interference (EMI) PCB, and a Sound Board. A040733-01 EMI Shield and Dual PCB Assembly -- includes: A039431-01 Cloak & Dagger Interconnect PCB A039938-21 Cloak & Dagg
File: /kb_dl.aspx/KB/gametech/cloak&da.ger.txt - 12 K - Updated 1996.04.03

Arcade Game Cheats
--- 720 --- (Contributor: unknown) In the ramp section, levels 8, 9, and 10: holding down the kick and jump buttons simultanously on the lip of the ramp will boost your air. This trick only works when you're going the correct speed (usually your third or fourth jump), and only once (as far as I can tell) per ramp session per level. ----------- Afterburner ----------- (Contributor: Anthony D. Chen) key: S - start button V - vulcan cannon M - missle F - foot sensor (only on sit-down version) stag
File: /kb_dl.aspx/KB/faqs/faq-arcade cheats.html - 112 K - Updated 1999.10.30

/kb_dl.aspx/KB/pinouts/pinout_help.txt
----------------------------------------------------------------------------. Title : Arcade Game Pinouts : Date : 09-January-2003 : Source : taken from the Conversion FAQ v1.1 : by Doug Jefferys, Steve Ozdemir : and pinout identification by Tim Lindquist : --------------------------------------
File: /kb_dl.aspx/KB/pinouts/pinout_help.txt - 39 K - Updated 2003.01.09

Links to Other Sites

coin operated games
buy sell trade coin operated video,pin balls,juke boxes,pac man,galaga,asteroids,defender,stargate,dragons lair,joust
(Submitted by pacman )