home · games · tech info · articles · about · contact us
 
Disclaimer: This information is provided as is. There may be errors in this information. You may use this information only if you agree that Minimalist / Coinop.org, its employees, and noted authors will never be held responsible for any damage, injury, death, mayhem, etc. caused by errors in the information. When working with high voltage, never work alone and always follow safety precautions.

Document Title: [Battlezone.txt (text file)]

2/7/96 T. Franklin Bowen (mjrhavoc@clark.net or tfbowen@ingr.com)
Typed in straight from the manual so use at your own risk!

---------------------------------------------------------------------------

Pinouts for "BATTLEZONE" (Atari, 1980 (according to docs))


P18: 44-pin edge connector (aux/small board)

        component side        solder side
        --------------        -----------
               +5V RTN  A  1  +5V RTN
                        B  2  +5V           (P20:Y)
                        C  3  +22VDC
                        D  4
             AUDIO RTN  E  5  AUDIO +OUT
                        F  6  AUDIO -OUT
                        H  7  START LED
                        J  8
                        K  9
                        L 10
                        M 11
                        N 12  FIRE
                        P 13  START
                        R 14  LFT REVERSE
                        S 15  LFT FORWARD
                        T 16  RT REVERSE
                        U 17  RT FORWARD
(P20:V)          RESET  V 18
                        W 19
                        X 20
               LED PWR  Y 21
                   GND  Z 22  GND


P20: 44-pin edge connector (main/large board)

        component side        solder side
        --------------        -----------
               +5V RTN  A  1  +5V RTN
               +5V REG  B  2  +5V REG
                        C  3  +22VDC
                        D  4  -22VDC
                COIN L  E  5
                COIN C  F  6  SLAM
                COIN R  H  7  TEST
           COIN CNTR R  J  8  COIN CNTR L
                        K  9  COIN CNTR C
                        L 10
                        M 11
                   GND  N 12  GND
                        P 13
                        R 14
                 Z OUT  S 15  Z GND
                 X OUT  T 16  X GND
                 Y GND  U 17  Y OUT
(P18:V)          RESET  V 18
                        W 19  -5VDC
                        X 20  +12VDC
(P18:2)        +5V OUT  Y 21  +SENSE (+5V)
                   GND  Z 22  -SENSE (GND)



Notes:
------
- anything in parenthesis was added by me.
  Everything else, straight from the manual!
- RESET is shown active low at P20 and active high at P18.  Go figger!
}