home · games · tech info · articles · about · contact us
 
Disclaimer: This information is provided as is. There may be errors in this information. You may use this information only if you agree that Minimalist / Coinop.org, its employees, and noted authors will never be held responsible for any damage, injury, death, mayhem, etc. caused by errors in the information. When working with high voltage, never work alone and always follow safety precautions.

Document Title: [BubbleBobble_44.txt (text file)]

Here is the Bubble bobble wiring harness pinouts.  Send corrections to:
djbarnes@eos.ncsu.edu

The 44 pin connector is as follows:

                ________________________________________________
                |Component Side |               |Solder Side   |
                |---------------|-------|-------|--------------|
                |Ground         |   1   |   A   |Ground        |
                |---------------|-------|-------|--------------|
                |Video Red      |   2   |   B   |Video Ground  |
                |---------------|-------|-------|--------------|
                |Video Green    |   3   |   C   |Video Blue    |
                |---------------|-------|-------|--------------|
                |Video Sync     |   4   |   D   |N/U           |
                |---------------|-------|-------|--------------|
                |Speaker +      |   5   |   E   |Speaker -     |
                |---------------|-------|-------|--------------|
                |Key            |   6   |   F   |Key           |
                |---------------|-------|-------|--------------|
                |N/U            |   7   |   H   |N/U           |
                |---------------|-------|-------|--------------|
                |Coin Sw        |   8   |   J   |N/U           |
                |---------------|-------|-------|--------------|
                |Coin Meter     |   9   |   K   |N/U           |
                |---------------|-------|-------|--------------|
                |N/U            |  10   |   L   |N/U           |
                |---------------|-------|-------|--------------|
                |Service Sw     |  11   |   M   |Slam Sw       |
                |---------------|-------|-------|--------------|
                |1P sw          |  12   |   N   |2P sw         |
                |---------------|-------|-------|--------------|
                |N/U            |  13   |   P   |              |
                |---------------|-------|-------|--------------|
                |N/U            |  14   |   R   |              |
                |---------------|-------|-------|--------------|
                |1P right       |  15   |   S   |2P right      |
                |---------------|-------|-------|--------------|
                |1P left        |  16   |   T   |2P left       |
                |---------------|-------|-------|--------------|
                |N/U            |  17   |   U   |              |
                |---------------|-------|-------|--------------|
                |N/U            |  18   |   V   |              |
                |---------------|-------|-------|--------------|
                |N/U            |  19   |   W   |              |
                |---------------|-------|-------|--------------|
                |N/U            |  20   |   X   |              |
                |---------------|-------|-------|--------------|
                |Bubble Sw      |  21   |   Y   |Bubble        |
                |---------------|-------|-------|--------------|
                |Jump           |  22   |   Z   |Jump          |
                |---------------|-------|-------|--------------|


The 36 pin connector is ground wired to 1-4, and A-D.  Then wire +5V to 15-18, and S-V.

The power harness is as follows:

1       Ground
2       Ground
3       Ground
4       Ground
5       +5VDC
6       +5VDC
7       +5VDC
8       -5VDC
9       +12VDC
10      key
11      +12VDC
12      +12VDC


To use the board without a coin meter, you must insert a jumper across the points of J7
(located near IC 60, the large brown SIP IC near the G connector).


}