Disclaimer: This information is provided as is. There may be errors in this information. You may use this information only if you agree that Minimalist / Coinop.org, its employees, and noted authors will never be held responsible for any damage, injury, death, mayhem, etc. caused by errors in the information. When working with high voltage, never work alone and always follow safety precautions.

Document Title: [Galaga_boot2.txt (text file)]

From: ub2f@rz.uni-karlsruhe.de (Ralph Kimmlingen)
Date: 5. Oct 1995

                  yet another Galaga'82 pinout

    a) main connector

    ---------------------------------------------------------
                Solder Side |  PIN  | Component Side
    ---------------------------------------------------------
                        GND | A | 1 | GND
                        GND | B | 2 | GND
                        +5V | C | 3 | +5V
                        +5V | D | 4 | +5V 
                       +12V | E | 5 | +12V
                  Speaker + | F | 6 | N.C.
                       N.C. | H | 7 | N.C. 
                            | J | 8 | N.C.
                            | K | 9 | N.C.
                       N.C. | L | 10| N.C.
                  Self Test | M | 11| Coin1
                      Coin1 | N | 12| Coin2
                     Start2 | P | 13| Start1
                            | R | 14| Fire
                            | S | 15| Left
                            | T | 16| Right
                            | U | 17| N.C.
                       N.C. | V | 18| N.C.
                        +5V | W | 19| +5V 
                        +5V | X | 20| +5V
                        GND | Y | 21| GND
                        GND | Z | 22| GND
    ---------------------------------------------------------

    b) video connector (located on bottom side of the two-platine sandwich)

       it looks like this:
        
        12345   
       |.....|
       ------- <------ plastic nose
        
       	-------------------------------
	|  1  |  2  |  3  |  4  |  5  | 
	-------------------------------
	| GND | Sync| Red |Green|Blue | 
	-------------------------------



Note1: By grounding the self test pin, you can reset the game at any time.
       After some seconds the setup-menu will appear. 
       (connect a switch to this pin!)


Note2: Speaker- can be connected to GND.







}