Document Title: [Liberation.txt (text file)]
Liberation
(C) 1984 Data East [Deco]
Ok. This board has two connectors, the top board has a 18 way edge, and the
bottom board has a 10-way Edge. Thanks go to Bryan McPhail for sending me
the burgertime pinouts - unfortunately they dont tie up, except the 10-way
is almost the same...
Enough dallying - heres what I've found:
18-Way Top PCB Connector
PARTS SIDE SOLDER SIDE (not labelled)
-------------------------------+----+----+-------------------------------
+12v | B1 | A1 | +12v
-------------------------------+----+----+-------------------------------
+5v | B2 | A2 | +5v
-------------------------------+----+----+-------------------------------
+5v | B3 | A3 | +5v
-------------------------------+----+----+-------------------------------
+5 | B4 | A4 | +5v
===============================+ KEY WAY +===============================
| B5 | A5 |
-------------------------------+----+----+-------------------------------
Coin SW 1 | B6 | A6 |
-------------------------------+----+----+-------------------------------
Tilt | B7 | A7 |
-------------------------------+----+----+-------------------------------
Player 1 Start | B8 | A8 | Player 2 Start
-------------------------------+----+----+-------------------------------
Player 1 Button 2 (Land) | B9 | A9 |
-------------------------------+----+----+-------------------------------
Player 1 Button 1 (Fire) | B10| A10|
-------------------------------+----+----+-------------------------------
Player 1 Down | B11| A11|
-------------------------------+----+----+-------------------------------
Player 1 Up | B12| A12|
-------------------------------+----+----+-------------------------------
Player 1 Left | B13| A13|
-------------------------------+----+----+-------------------------------
Player 1 Right | B14| A14|
-------------------------------+----+----+-------------------------------
Speaker + | B15| A15| Speaker - / GND
-------------------------------+----+----+-------------------------------
GND | B16| A16| GND
-------------------------------+----+----+-------------------------------
GND | B17| A17| GND
-------------------------------+----+----+-------------------------------
GND | B18| A18| GND
-------------------------------+----+----+-------------------------------
10-Way Bottom (video) PCB Connector
[BURGERTIME IN REVERSE!!]
PARTS SIDE SOLDER SIDE (not labelled)
-------------------------------+----+----+-------------------------------
GND | B1 | A1 | +12v
-------------------------------+----+----+-------------------------------
GND | B2 | A2 | +5v
-------------------------------+----+----+-------------------------------
GND | B3 | A3 | +5v
===============================+ KEY WAY +===============================
Video Blue | B4 | A4 | Video Sync
-------------------------------+----+----+-------------------------------
Video Red | B5 | A5 | Video Green
-------------------------------+----+----+-------------------------------
| B6 | A6 |
-------------------------------+----+----+-------------------------------
| B7 | A7 |
-------------------------------+----+----+-------------------------------
+5v | B8 | A8 | +5v
-------------------------------+----+----+-------------------------------
+5v | B9 | A9 | +5v
-------------------------------+----+----+-------------------------------
+5v | B10| A10| +5v
-------------------------------+----+----+-------------------------------
-Dont know if theres -5 needed (cant see any wrong way round caps)
-Unless the DIP set it, couldnt get 2p Controls - uses single player
-No counters in my cabs so no pinouts found ;P
Compiled by D. P. Escott
http://www.rtype.com
05-Jul-1999
}
