Disclaimer: This information is provided as is. There may be errors in this information. You may use this information only if you agree that Minimalist / Coinop.org, its employees, and noted authors will never be held responsible for any damage, injury, death, mayhem, etc. caused by errors in the information. When working with high voltage, never work alone and always follow safety precautions.

Document Title: [Super_Zaxxon.txt (text file)]


Zaxxon / Super Zaxxon / Congo Bongo

                       SOLDER SIDE  |  PARTS SIDE
                            Gnd | A | 1 | Gnd
                            Gnd | B | 2 | Gnd
                            +5V | C | 3 | +5V
                            +5V | D | 4 | +5V
                            -5V | E | 5 | -5V
                           +12V | F | 6 | (+12V)
  [from P4-4 & to Spkr?] Spkr - | H | 7 | Spkr + [from P4-3 & to Spkr?]
                 (Coin Meter A) | J | 8 | (Coin Meter B)
                    Coin Mech A | K | 9 | Coin Mech B
                          Reset | L | 10| Service Switch
                       P1 Start | M | 11| P2 Start
                        P1 Left | N | 12| P1 Right
                          P1 Up | P | 13| P1 Down
                        P1 Fire | R | 14| (P1 Spare)
                      (P2 Left) | S | 15| (P2 Right)
                        (P2 Up) | T | 16| (P2 Down)
                      (P2 Fire) | U | 17| (P2 Spare)
                          (Gnd) | V | 18| (Gnd)
                              R | W | 19| G
                              B | X | 20| Comp Sync *
                          (Gnd) | Y | 21| (Gnd)
                          (Gnd) | Z | 22| (Gnd)

* At the bottom center of the Sound II board, there is a section labeled
"Color Conv."  At the far left you will see switch #4 (SW4).  If this switch
is off ("0"), you will get JAMMA compatible negative composite sync.  If it
is on ("1"), you will get positive composite sync.

}