home · games · tech info · articles · about · contact us
 
Disclaimer: This information is provided as is. There may be errors in this information. You may use this information only if you agree that Minimalist / Coinop.org, its employees, and noted authors will never be held responsible for any damage, injury, death, mayhem, etc. caused by errors in the information. When working with high voltage, never work alone and always follow safety precautions.

Document Title: [Virtua_Fighter3.txt (text file)]

Pinouts for Virtua Fighter 3 - Sega Model 3 step 1.0 PCB set.


   POWER CONNECTORS
   ----------------

   JST CN13
   1-8 - +3.3 volts
   9-18 - Ground
   19-24 - +5 volts

   JST CN14
   1-5 - +5 volts
   6-10 - Ground

   JST CN15 (Used for cage fans only)
   1 - +12v
   2 - NC
   3 - Ground


   VIDEO
   -----

   JST CN6 (Can also use 15 pin VGA connector CNVGA1 but output at
   24KHz/H;60Hz/V)
   1 - Red
   2 - Green
   3 - Blue
   4 - Composite Sync
   5 - Ground
   6 - NC


   AUDIO
   -----

   JST CN8
   1 - Left Ground
   2 - Left Signal
   3 - Right Ground
   4 - Right Signal


   CONTROL INPUTS
   --------------

   JST CN2
   1 - Coin 1
   2 - Coin 2
   3 - Test
   4 - Service
   5 - NC
   6 - NC
   7 - Start P1
   8 - Start P2
   9 - Up P1
   10 - Down P1
   11 - Left P1
   12 - Right P1
   13 - Button 1 P1
   14 - Button 2 P1
   15 - Button 3 P1
   16 - Button 4 P1
   17 - Up P2
   18 - Down P2
   19 - Left P2
   20 - Right P2
   21 - Button 1 P2
   22 - Button 2 P2
   23 - Button 3 P2
   24 - Button 4 P2
   25 - NC
   *Please confirm the UDLR pins with the test menu, as these are from
   memory!


   CONTROL OUTPUTS
   ---------------

   JST CN3
   1 - Coin Meter 1
   2 - Coin Meter 2
   3-8 - NC

   Remember you need a 3.3v PSU as well as 5v, so use a computer ATX
   supply, it's ideal!}