Disclaimer: This information is provided as is. There may be errors in this information. You may use this information only if you agree that Minimalist / Coinop.org, its employees, and noted authors will never be held responsible for any damage, injury, death, mayhem, etc. caused by errors in the information. When working with high voltage, never work alone and always follow safety precautions.

Document Title: [ (text file)]

                       STAR WARS

P20: 44-pin edge connector

        component side        solder side
        --------------        -----------
                   GND  A  1  GND
                   +5V  B  2  +5V
                        C  3  GND     
                   -5V  D  4  GND     
              10.3 VDC  E  5
                        F  6            
            COIN CTR R  H  7  L COIN CNT
                 PITCH  J  8
                  ROLL  K  9
                        L 10  L FIRE/START
             SELF TEST  M 11          
                L COIN  N 12  R COIN
              AUX COIN  P 13  GND
                   GND  R 14  R FIRE/START
               L THUMB  S 15  R THUMB
                        T 16        
               AUDIO 1  U 17  AUDIO 2
                        V 18
                        W 19
                        X 20  +12V
                   +5V  Y 21  +SENSE (+5V)
                   GND  Z 22  -SENSE (-5V)

P18: 24-pin edge connector

        component side        solder side
        --------------        -----------
                   GND  A  1       
                   +5V  B  2       
                  +12V  C  3  +22V  
                        D  4  -22V   
                        E  5           
                        F  6  RED   
               RED GND  H  7  GREEN
             GREEN GND  J  8  BLUE 
              BLUE GND  K  9  Y OUT
                 Y GND  L 10  X OUT
                 X GND  M 11          
                        N 12          

Table 1-2 Switch  settings for play options
seeetings of 8-toggle switch of Star Wars game PCB (at 10D)

1     2     3    4    5    6    7   8   options
------------------------------------------------------------------------------
On   On                                6 starting shields
Off  On                                7 starting shields
On   Off                               8 starting shields
Off  Off                               9 starting sheilds
           On   On                     easy game play
           Off  On                     moderate gaem play
           On   Off                    hard game play
           Off  Off                    hardest game play
                      On  On           0 bonus shields for dest. Death Star
                      Off On           1 bonus shield for dest. Death Star
                      On  Off          2 bonus shields for dest. Death Star
                      Off Off          3 bonus shields for dest. Death Star
                                On     Music in Attract mode
                                Off    No music in Attract mode
                                    On Freeze Mode
                                   Off Normal game play
 
the recommeneded settings are 6 shields, hard game play, 1 bonus shield, music
in attract, and normal game play
 
There is another 8-toggle switch that controls the amount of coins and such
If you have setting 1 and 2 both On, it will give free game play, otherwise
the sequence is the same as above, with options as follows: 2 credits, 1, 1/2.
The other settings just deal with the 2 coin mechanisms, and I doubt they
would be important to you.  This setting switch should be called 10E/F
 
There is one more 4 setting toggle switch, only 1 is used.  If it is on then
The outputs of counter driver 1 and 2 are tied together (for 1 counter). If it
is off, then the counters are separate (for 2 counters).