Disclaimer: This information is provided as is. There may be errors in this information. You may use this information only if you agree that Minimalist / Coinop.org, its employees, and noted authors will never be held responsible for any damage, injury, death, mayhem, etc. caused by errors in the information. When working with high voltage, never work alone and always follow safety precautions.

Document Title: [TerraCresta.txt (text file)]

Terra Cresta Pinouts
Nichibutsu, 1985

                     Solder           Parts
-----------------------------------------------------------
                      P1 Up | 1 | A | P1 Down
                    P1 Left | 2 | B | P1 Right
                   P1 Shoot | 3 | C | P1 Formation
                      P2 Up | 4 | D | P2 Down
                    P2 Left | 5 | E | P2 Right
                   P2 Shoot | 6 | F | P2 Formation
                     Coin 1 | 7 | H | Coin 2
                        Gnd | 8 | J | Gnd
                        Gnd | 9 | K | Gnd
                        +5V |10 | L | +5V
                       +12V |11 | M |
                            |12 | N | +12V
                        +5V |13 | P | +5V
                        Gnd |14 | R | Gnd
                        Gnd |15 | S | Gnd
                   P1 Start |16 | T | P2 Start
                       Test |17 | U | Service
                  Counter 1 |18 | V | Counter 2
                      Spkr+ |19 | W | Spkr-
                            |20 | X | Red 
                      Green |21 | Y | Blue
                        Gnd |22 | Z | Sync

Notes:
1) Pin #4-6 should be NO CONNECTION in upright
2) A microswitch-type joystick is recommended for normal play

Control Panel Layout:

   O                 O
       O         O   ^Formation
            J    ^Fire
            ^ Joystick}