home · games · tech info · articles · about · contact us
 
Disclaimer: This information is provided as is. There may be errors in this information. You may use this information only if you agree that Minimalist / Coinop.org, its employees, and noted authors will never be held responsible for any damage, injury, death, mayhem, etc. caused by errors in the information. When working with high voltage, never work alone and always follow safety precautions.

Document Title: [Cabal.txt (text file)]

Howdy
 
These are the DIP switch settings for the Cabal PCB, as determined
by trial & error on my part.  I _assume_ these settings probably
also work for Blood Brothers, since that was a direct sequel of
Cabal (same darn game, just w/ different graphics).  Note, I do
not guarantee their accuracy and if your board goes up in smoke
because you followed this list or your dog runs away or anything
else, IT IS NOT MY FAULT!  If you have any questions, you can
reach me (Jason Dante Bardis) at jasonbar@engineering.ucsb.edu
 
 
DIP SWITCH 1
1. COIN OPTIONS
 
1	2	3	4	COIN		CREDIT
OFF	OFF	OFF	OFF	1		1
ON	OFF	OFF	OFF	2		1
ON	ON	OFF	OFF	4		1
OFF	ON	OFF	OFF	3		1
ON	ON	ON	OFF	1		3
OFF	OFF	ON	OFF	5		1
OFF	ON	ON	OFF	1		2
ON	OFF	ON	OFF	6		1
ON	OFF	ON	ON	5		3
(I GOT BORED HERE AND DID NOT FINISH...)
 
2. OTHER FUN OPTIONS
 
5: 	NO APPARENT EFFECT
6:	SWAP FIRE/GRENADE BUTTONS
7:	INVERT SCREEN
8: 	NO APPARENT EFFECT
 
 
DIP SWITCH 2
1. NUMBER OF GUYS/GAME
 
1	2	GUYS
OFF	OFF	3
ON	OFF	2
OFF	ON	5
ON	ON	10
 
2. OTHER FUN OPTIONS
 
3: 	NO APPARENT EFFECT
4: 	NO APPARENT EFFECT
5: 	NO APPARENT EFFECT
6: 	NO APPARENT EFFECT
7: 	NO APPARENT EFFECT
8: 	NO APPARENT EFFECT
}