home · games · tech info · articles · about · contact us
Disclaimer: This information is provided as is. There may be errors in this information. You may use this information only if you agree that Minimalist / Coinop.org, its employees, and noted authors will never be held responsible for any damage, injury, death, mayhem, etc. caused by errors in the information. When working with high voltage, never work alone and always follow safety precautions.

Document Title: [1000_Miglia.txt (text file)]

 1000 Miglia (Great 1000 Miles Rally) KANEKO 1994, Inc.   Pinouts = JAMMA
 ------------------------------------------------------------------------

+ 5V (+0.5 -0.1) -> 4A
+12V (+0.5 -0.5) -> 1A

DIP Switch on Rom Board   | SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | SW7 | SW8 |
--------------------------|-----|-----|-----|-----|-----|-----|-----|-----|
Normal Mode               | OFF |     |     |     |     |     |     |     |
Settings Mode             | ON  |     |     |     |     |     |     |     |
--------------------------------------------------------------------------|
Normal Screen             |     | OFF |     |     |     |     |     |     |
Reverse Screen            |     | ON  |     |     |     |     |     |     |
--------------------------|-----|-----|-----|-----|-----|-----|-----|-----|
Upright 		  |     |     | OFF |     |     |     |     |     |
Table                     |     |     | ON  |     |     |     |     |     |
--------------------------|-----|-----|-----|-----|-----|-----|-----|-----|
Controllers             **|     |     |     | OFF |     |     |     |     |
                          |     |     |     | ON  |     |     |     |     |
--------------------------|-----|-----|-----|-----|-----|-----|-----|-----|
Controller: 1P side       |     |     |     |     | OFF |     |     |     |
Controller: both side     |     |     |     |     | ON  |     |     |     |
--------------------------|-----|-----|-----|-----|-----|-----|-----|-----|
A button = Brake         *|     |     |     |     |     | OFF |     |     |
Brake unused              |     |     |     |     |     | ON  |     |     |
--------------------------|-----|-----|-----|-----|-----|-----|-----|-----|
Anthem&Flag:              |     |     |     |     |     |     |     |     |
Follow memory settings    |     |     |     |     |     |     | OFF | OFF |
National Anthem, no flag  |     |     |     |     |     |     | ON  | OFF |
National Flag, no anthem  |     |     |     |     |     |     | OFF | ON  |
Neither used              |     |     |     |     |     |     | ON  | ON  |
--------------------------|-----|-----|-----|-----|-----|-----|-----|-----|

*: this setting is valid only when the joystick is used. When Dip Switch 6 is turned on, Brake Button is not used. Button A turns to be Accelerator Button.

**:
Controllers           | Dip on Rom Board | Dip on Daughter Board | NH connectors used |
----------------------|------------------|-----------------------|--------------------|
Joystick              | 4:OFF            |                       |                    |
----------------------|------------------|-----------------------|--------------------|
360o Wheel            | 4:ON ; 5:OFF     | 1:ON                  | 6 pins ; #3-#6     |
----------------------|------------------|-----------------------|--------------------|
270o Wheel            | 4:ON ; 5:ON      | 2:ON                  | 5 pins ; #1-#3     |   ----------------------|------------------|-----------------------|--------------------|

NH connectors on pcb | Pin at Wheel |
---------------------|--------------|
pin #3               | +5V          |
---------------------|--------------|
pin #4               | Clock ***    |
---------------------|--------------|
pin #5               | Up-Down      |
---------------------|--------------|
pin #6               | Ground       |
---------------------|--------------|

***: Clock pulse width = minimum 2ms. When Clock goes high from low:
- and up-down pulse is high -> Clockwise
- and up-down pulse is low  -> CCW
}