Disclaimer: This information is provided as is. There may be errors in this information. You may use this information only if you agree that Minimalist / Coinop.org, its employees, and noted authors will never be held responsible for any damage, injury, death, mayhem, etc. caused by errors in the information. When working with high voltage, never work alone and always follow safety precautions.

Document Title: [BattleLane.txt (text file)]

***************************************************************************
BattleLane Vol. 5 -- Vertical	Taito/Romstar '86

***************************************************************************
**************************** BATTLELANE PINOUT ****************************
***************************************************************************

       --------------------------------------------------------
	 Solder Side		|	   Parts Side
       -------------------------+------------------------------
	 2P  Down	    | A | 1 |	   1P  Down
	 2P  Up		    | B | 2 |	   1P  Up
	 2P  Left	    | C | 3 |	   1P  Left
	 2P  Right	    | D | 4 |	   1P  Right
			    | E | 5 |
			    | F | 6 |
			    | H | 7 |
	    ?		    | J | 8 |	   Service
	 2P  Fire	    | K | 9 |	   1P  Fire
	 2P  Missile	    | L | 10|	   1P  Missile
	 2P  Start	    | M | 11|	   1P  Start
	 Coin Switch #2	    | N | 12|	   Coin Switch #1
	 Coin Counter #2    | P | 13|	   Coin Counter #1
	 Video Red	    | R | 14|	   Video Green
	 Video Blue	    | S | 15|	   Video Sync
			    | T | 16|
	 Speaker	    | U | 17|	   Speaker
	     +12	    | V | 18|
	     +5		    | W | 19|	       +5
	     +5		    | X | 20|	       +5
	     GND	    | Y | 21|	       GND
	     GND	    | Z | 22|	       GND
       ------------------------------------------------------
	Note that Video Ground must be connected to +5


***************************************************************************
**************************** BATTLELANE ADAPTER ***************************
***************************************************************************
  My board came with a fingerboard connector which plugs onto the
BattleLane board and supplies the following pinouts.
       --------------------------------------------------------
	 Solder Side		|	   Parts Side
       -------------------------+------------------------------
			    | A | 1 |
			    | B | 2 |
			    | C | 3 |
			    | D | 4 |	   
			    | E | 5 |	   
	 Video Sync	    | F | 6 |	   Video Green
	 Video Red	    | H | 7 |	   Video Blue
	     GND	    | J | 8 |	       GND
	 1P  Down	    | K | 9 |	   1P  Missile
			    | L | 10|	   1P  Fire
			    | M | 11|	   1P  Up
	 1P  Right	    | N | 12|	   1P  Left
	 2P  Start	    | P | 13|	   1P  Start
			    | R | 14|	   
			    | S | 15|	   Coin Switch #1
	 Coin Counter #1    | T | 16|	   Speaker
			    | U | 17|	   Speaker
	     +5		    | V | 18|	   
			    | W | 19|	   
			    | X | 20|	   
			    | Y | 21|	   
			    | Z | 22|	   
       ------------------------------------------------------
	Note that Video Ground must be connected to +5
	There are also some labeled wires coming off the connector:
	   GND (black and green)
	    +5 (red)
	   +12 (yellow)
}