Document Title: [Cabal.txt (text file)]
Name Of Game: Cabal (joystick version)
From: Clive Bittlestone (clyvb@asic.sc.ti.com)
- I can not take any responsibility for the accuracy of this information,
although I was careful. It claims to be standard JAMMA, but lettering
is different, and button 3 is used for the test and service sw rather
than the JAMMA "Button3" (X,24)
- Modified from Tim Tewalt's original JAMMA pinout.
- Thanks to Jeff Ranlett for faxing me a copy of this data.
- I do not have the pinout for the trackball version yet, if
anyone has a trackball Cabal, please can you post/email me
the pinout at clyvb@asic.sc.ti.com, I have not yet had the courage
to go guessing on my board....
--------------------------------------------------------------
Solder Side | Parts Side
--------------------------------------------------------------
GND | A | 1 | GND
GND | B | 2 | GND
+5 | C | 3 | +5
+5 | D | 4 | +5
-5 | E | 5 | -5
+12 | F | 6 | +12
- KEY - | G | 7 | - KEY -
Coin Counter # 2 | H | 8 | Coin Counter # 1
| I | 9 |
Speaker (-) | J | 10| Speaker (+)
| K | 11|
Video Green | L | 12| Video Red
Video Sync | M | 13| Video Blue
2pl button 3 | N | 14| Video GND
| O | 15| 1pl button 3
Coin Switch # 2 | P | 16| Coin Switch # 1
2P Start | Q | 17| 1P Start
2P Up | R | 18| 1P Up
2P Down | S | 19| 1P Down
2P Left | T | 20| 1P Left
2P Right | U | 21| 1P Right
2P Button 1 | V | 22| 1P Button 1
2P Button 2 | W | 23| 1P Button 2
| X | 24|
| Y | 25|
| Z | 26|
GND | a | 27| GND
GND | b | 28| GND
--------------------------------------------------------------
}
