Document Title: [OperationWolf.txt (text file)]
"Operation Wolf"
"G" Connector
Solder Side Components Side
Switch ground A 1 Switch Ground
Video ground B 2 Video Red
Video Blue C 3 Video Green
(not used) D 4 Video Sync
(not used) E 5 (not used)
KEY F 6 KEY
(not used) H 7 (not used)
Coin Switch B J 8 Coin Switch A
Coin Meter B K 9 Coin Meter A
Coin Lockout B L 10 Coin Lockout A
Tilt Switch M 11 Service switch
(not used) N 12 Start Switch
(not used) P 13 (not used)
(not used) R 14 (not used)
(not used) S 15 (not used)
(not used) T 16 (not used)
(not used) U 17 (not used)
(not used) V 18 (not used)
(not used) W 19 (not used)
VR 1 X 20 (not used)
VR 2 Y 21 Trigger 1 Switch
VR 3 Z 22 (not used)
"T" Connector
Solder Side Components Side
Ground A 1 Ground
Ground B 2 Ground
Ground C 3 Ground
Ground D 4 Ground
(not used) E 5 OUT
(not used) F 6 (not used)
KEY H 7 KEY
(not used) J 8 (not used)
(not used) K 9 (not used)
(not used) L 10 (not used)
(not used) M 11 (not used)
(not used) N 12 (not used)
(not used) P 13 (not used)
(not used) R 14 (not used)
+5 Volts DC S 15 +5 Volts DC
+5 Volts DC T 16 +5 Volts DC
+5 Volts DC U 17 +5 Volts DC
+5 Volts DC V 18 +5 Volts DC
"H" Connector "X" Connector "M" Connector
1 Ground 1 Right Speaker (+) 1 M+
2 Ground 2 Right Speaker (-) 2 M-
3 Ground 3 Left Speaker (+) 3 (not used)
4 Ground 4 (not used) 4 Trigger 2 Switch
5 +5 Volts DC 5 Left Speaker (-)
6 +5 Volts DC
7 +5 Volts DC
8 -5 Volts DC
9 +13 Volts DC
10 KEY
11 +12 Volts DC
12 +12 Volts DC
Unfortunately, I can give no insight on exactly what "M+", "M-", and the
"VR" connections do: There will be the opto for the gun, the coil for
the gun kick-back, the sound potentiometer ("VR 1" to "VR 3".)
A few years ago, I could have told you exactly where everything would
be connected to, but not today :(
Good luck and keep on gaming! :)
Sincerely Yours,
David Choi (DCI #3)
}
