Document Title: [Mill-2-Centipede.conv.txt (text file)]

youMillipede to Centipede wiring conversion.
-----------------------------------------

The connector listed below is the Centipede connector.  The
corresponding Millipede connector location is listed in the
brackets.  P20 goes to P20 and P19 to P19 unless otherwise
stated.

Game : Millipede/Centipede
       -> denotes Cocktail 
       N.C. means No Connection

Wiring List for P20:
                                |
--------------------------------|-----------------------------------
   GND                  [ A]| A | 1 |[ 1]      Ground
----------------------------|---|---|-------------------------------
   + 5 V                [ B]| B | 2 |[ 2]      + 5 V
----------------------------|---|---|-------------------------------
   + 12 V            [P10-4]| C | 3 |          + 22 V DC
----------------------------|---|---|-------------------------------
   - 5 V             [P10-9]| D | 4 |          - 22 V DC
----------------------------|---|---|-------------------------------
                            | E | 5 |          Center Coin Counter
----------------------------|---|---|-------------------------------
   Left Coin Counter [P19-C]| F | 6 |[P19-A]   Right Coin Counter
----------------------------|---|---|-------------------------------
                            | H | 7 |    
----------------------------|---|---|-------------------------------
   Start 1 LED       [P19-3]| J | 8 |[P19-4]   Start 2 LED
----------------------------|---|---|-------------------------------
                            | K | 9 |          -> Fire Button 2
----------------------------|---|---|-------------------------------
   Start 2              [ P]| L | 10|[ N]      Fire Button
----------------------------|---|---|-------------------------------
   Start 1              [14]| M | 11|          -> Tball Horiz Clk 2
----------------------------|---|---|-------------------------------
   Tball Horiz. Clock   [ C]| N | 12|          -> Tball Vert. Clk 2
----------------------------|---|---|-------------------------------
   Tball Vert. Clock    [ D]| P | 13|[17]      Self Test  
----------------------------|---|---|-------------------------------
   Left Coin Slot       [ T]| R | 14|[ U]      Right Coin Slot *
----------------------------|---|---|-------------------------------
   Slam                 [ R]| S | 15|[GND]     Cocktail (Tie to GND)
----------------------------|---|---|-------------------------------
   Center Coin Slot         | T | 16|         -> Horiz. Dir. 2
----------------------------|---|---|-------------------------------
   Tball Horiz. Dir.    [ 5]| U | 17|         -> Vert. Dir. 2
----------------------------|---|---|-------------------------------
   Reset (N. C.)        [ V]| V | 18|[ 6]      Tball Vert. Dir.
----------------------------|---|---|-------------------------------
   -22 V DC             [ W]| W | 19|    
----------------------------|---|---|-------------------------------
   +22 V DC             [ X]| X | 20|    
----------------------------|---|---|-------------------------------
   + 5 V (Controls)     [ Y]| Y | 21|[21]      + Sense
----------------------------|---|---|-------------------------------
                        [ Z]| Z | 22|[22]      - Sense
--------------------------------------------------------------------


Wiring List for P19:
                                |
--------------------------------|-----------------------------------
                            | A | 1 |[ 1]      Audio 2 Out
----------------------------|---|---|-------------------------------
                            | B | 2 |[ 2]      Audio 1 Out
----------------------------|---|---|-------------------------------
                            | C | 3 |
----------------------------|---|---|-------------------------------
                            | D | 4 |
----------------------------|---|---|-------------------------------
                            | E | 5 |
----------------------------|---|---|-------------------------------
                            | F | 6 |
----------------------------|---|---|-------------------------------
                            | H | 7 |
----------------------------|---|---|-------------------------------
                            | J | 8 |[11]      Video Green
----------------------------|---|---|-------------------------------
        Video Red       [12]| K | 9 |[10]      Video Blue
----------------------------|---|---|-------------------------------
        Video Return    [ H]| L | 10|          Video Vert. Sync.
----------------------------|---|---|-------------------------------
   Video Horiz. Sync        | M | 11|
--------------------------------------------------------------------
   Coin Ground          [ N]| N | 12|[ 7]      Composite Sync
--------------------------------------------------------------------


NOTES:

1.  Make sure the cocktail pin P20-15 is jumpered over to ground
    for uprights on the Centipede side connector.
2.  Install a jumper from P19-L to ground on the Millipede connector
    This is the ground for the Millipede coin mechs.  The ground on 
    P19-N is the ground for the Millipede service panel.
3.  The P10 connector for the -5 and +12 volts is on the Aud/RegII
    card.  You'll need to buy 2 .093 male molex pins to snap in
    the molex housing.
4.  To access the Centipede color grid, a momentary switch will
    need to be installed as the tilt switch.  The 2 Millipedes I've
    seen do not have tilt switches.
5.  Millipede cabinet uses composite sync whereas the Centipede
    cabinet uses horizontal and vertical syncs.
6.  The Centipede pinout on wiretap shows 'coin door ground' on
    pin P20-X and Start 2 LED on P20-R.  These are not correct.
    P20-X is +22 VDC and Start 2 LED is on P20-8.  I verified 
    this on schematics and on the Centipede harness.  P20-R is
    the TILT switch.
}