Disclaimer: This information is provided as is. There may be errors in this information. You may use this information only if you agree that Minimalist / Coinop.org, its employees, and noted authors will never be held responsible for any damage, injury, death, mayhem, etc. caused by errors in the information. When working with high voltage, never work alone and always follow safety precautions.

Document Title: [Scramble.txt (text file)]

* From: ung@filenet.com (Bill Ung)

                       "Scramble" Dip Switch Settings

    SW #1   SW #2       Rockets              SW #3       Cabinet
    -----   -----      ---------             -----       --------
     OFF     OFF       Unlimited              OFF        Table
     OFF     ON            5                  ON         Up Right
     ON      OFF           4
     ON      ON            3

    SW #4   SW #5      Coins/Play            SW #6
    -----   -----      ----------            -----
     OFF     OFF           4                 Unused
     OFF     ON            3
     ON      OFF           1
     ON      ON            2

    DIP Switch Location:

    On my system, there is a two-board set.  Looking at the board with
    the edge connector, component-side up and edge connector at the
    top-left; the DIP switch is located in the upper-left quadrant of
    the board.  The switches are in a vertical formation, SW #1 at the
    top and SW #6 at the bottom.  ON is towards the right and OFF is
    towards the left.

    Volume Control Location:

    With the board in the same orientation, the volume control is
    accessible through the hole in the large metal heatsink located
    on the right-hand side of the board.  Turn clockwise to increase