Document Title: [tapper.txt (text file)]
Tapper
------
This is a complete pinout for the Bally/Midway
game Tapper. It was a bear to type in so when
you get it running pour on for me :)
Typed in by Denis Hruza (king@cybercomm.net)
There are 5 boards not including the Video Gen
Board (Power Chassis, Power Supply, Main PCB,
Sound I/O and Dual Audio Amp)
=======================================
Main PCB (A084-90010-AA11)
=======================================
J1 - 20 pin (GOES TO CONN4 POWER SUPPLY)
2 - +5v
3 - +5v
4 - +5v
6 - GND
7 - GND
10 - GND
17 - RESET
16 - V.BATT
18 - +12v
20 - A.GND
15 - KEY
----------------------------------------
J2 - 9 pin (MONITOR)
1 - RED
2 - STRAND
3 - GREEN
4 - VIO TAN
5 - BLUE
6 - VIO TAN
7 - KEY
8 - BLACK (GROUND?)
9 - GRAY
==========================================
SOUND I/O BOARD (A084-90913-AA11)
==========================================
J3 - 9 pin
1 ------\ TO VOLUME CONTROL
2 ------| " " (center tap)
3 ------/ " "
4 - KEY
5
6
7 - RED (TO AUDIO AMP PIN 8)
8 - STRAND (TO AUDIO AMP PIN 1)
9 - BLACK (TO AUDIO AMP PIN 2)
------------------------------------------
J4 - 19 pin
3 - PLAYER 1 START
4 - PLAYER 2 START
12 - UP
13 - DOWN
11 - RIGHT
10 - LEFT
15 - TAP
8 - TEST
9 - COMMON (3,4,10,11,12,13,15,8)
1 - COIN 1
2 - COIN 2
6 - TILT
7 - SERVICE
19 - COMMON (1,2,6,7)
-------------------------------------------
J5 - 23 pin
20 - COIN METER RETURN GOES TO
CONN 5 PIN 10 ON POWER SUPPLY
21 - COIN METER UNREG+5 GOES TO
CONN 5 PIN 1 ON POWER SUPPLY
-------------------------------------------
J6 - 10 pin (NOT USED)
===========================================
POWER CHASSIS (A945-00020-0000)
===========================================
CONN 1 - 9 Pin
(Goes to CONN 3 (9 pin) on SUPPLY BOARD)
6 - 15v UNREG
9 - 12v COMMON
7 - 5v COM
3 - 8v COM
2 - 8v COM
4 - 8v UNREG
8 - 8v UNREG
5 - 5v COM
------------------------------------------
CONN 2 -3 Pin (LINE CORD)
1 - NEUTRAL
2 - GND
3 - HOT
------------------------------------------
CONN 3 - 15 Pin
3 - 0v (WHT TO MONITOR)
6 - 115v (BLK TO MONITOR)
10 - 115v (TO FLUORESCENT LIGHT)
11 - 0v (TO FLUORESCENT LIGHT)
7 - RED --------| VOLATAGE SELECTOR
9 - 125v --------|
12 - 115v --------|
15 - 105v --------|
8 - 115v (TO FAN)
13 - 0v (TO FAN)
4 - 0v ------------|
14 - 115v ---------| |
| |
| |
|--|--- SAFETY SWITCH
| |
| |
2 - 0v ---------| |
1 - 115v ------------|
-------------------------------------------
CONN 4 - 2 PIN (GOES TO CONN 6 SUPPLY BOARD)
1 - 12v
2 - COM
============================================
POWER SUPPLY BOARD (A082-90412-B000)
============================================
CONN 5 - 15 Pin
14 - COIN DOOR LIGHTS
11 - COIN DOOR LIGHTS
13 - +12v (GOES TO AUDIO AMP J1 - PIN 11)
15 - GND (AUDIO RETURN GOES TO J1 PIN 6)
10 - COIN METER RETURN ( GOES TO J5 PIN 20 )
1 - UNREG +5v COIN METER ( GOES TO METER THEN
GOES TO J5 PIN 21)
5 - GND -> MAIN BOARD J1 PIN 14
2 - +5v -> MAIN BOARD J1 PIN 5
============================================
DUAL ADIO AMP (A084-91648-A304
============================================
J1 - 11 Pin
8 - See SOUND I/0 J3
1 - " "
2 - " "
11 - See POWER SUPPLY CONN 5
6 - " "
5 - " "
--------------------------------------------
J2 - 6 Pin
1 - RIGHT SPEAKER
2 - RIGHT SPEAKER
3 - KEY
4 - LEFT SPEAKER
5 - LEFT SPEAKER
-------------------------------------------Tapper Switch Settings and Scoring Table
----------------------------------------
Typed in by Denis Hruza (king@cybercomm.net)
OPTION SWITCH SETTINGS
------------------------------------------------------------
///// SWITCH NO.1 - AT B3 - LOCATED ON SOUND I/O BOARD /////
------------------------------------------------------------
Note:SW 1,2,4,5,6,8 and 9 are not used
During Gameplay: SW#3 SW#7 SW#10
Attract Mode
Sounds ON ON
Sounds OFF ** OFF
Cocktail ON
Upright ** OFF
Freeze Video ON
Normal Oper. ** OFF
------------------------------------------------------------
///// SWITCH NO.3 - AT D14 - LOCATED ON SOUND I/O BOARD ////
------------------------------------------------------------
*SW#1 *SW#2 *SW#3 *SW#4
Normal Oper ** OFF
Sound I/O Diag Mode ON
Normal Oper ** OFF
RAM/ROM Test ON
Indicates test results
VIA yellow LED on SOUND
I/O Board:
Fast flash = Bad ROM
Slow flash = Bad RAM
Normal Operation ** OFF
Oscillator Test ON
Normal Operation ** OFF
Filter Test ON
* No effect if SW#1 of Switch NO.3 is in the "OFF" position.
** Factory recommended settings.
The remainder of the game's most common option settings are
conducted during the MACHINE SETUP portion of the self-test
mode.
TAPPER SCORING
--------------
-----------------------------------------------------------
Description Points Awarded Notes
-----------------------------------------------------------
Pick up tip 1500 Points
Get drinkers
out of door 50 Points For every Cowboy
75 Points Every Sports person
100 Points Every Punk Rocker
150 Points Every Space Creature
Catch an empty Mug 100 Points For each one caught
Completing a rack 1000 Points
Completing Bonus
Rack 3000 Points }
